BENDPAK HD-9SWX 9,000-LB. CAPACITY SUPER WIDE 82″ RISE CAR STACKER PARKING LIFT

About this item :
The Ultimate Extended-Length, High-Rise, Double-Wide Car Lift

If you’re looking for a little more lifting height, extended-length runways and a lot less column interference, then our HD-9SWX four-post lift is the answer. This super-wide, extended-length model is designed to transform your garage into a state-of-the-art parking facility. It turns that two-car space into a four-car trophy stand. The HD-9SWX is an extended length model with higher rise to provide exceptional clearance underneath. The extra dimensions are particularly useful for parking or servicing long-wheelbase vehicles,

The best thing about this car lift is how easy it is to use. Low-stance vehicles glide onto the runways without risking damage to the chassis. It’s a smart solution for family garages and professional spaces. Auto shops sometimes prefer large lifts like the HD-9SWX because their techs need equipment that allows them to work on virtually anything that rolls through their doors. The 9,000-lb. capacity of this lift (4,500 lbs. max per car, per side) covers sedans and sports coupes. If you do need to step up into the next category of lifting, BendPak has four-post lift options, from the 14,000-lb. capacity HDS-14 series to the 40,000-lb. capacity HDS-40.

Features & Specs

9,000-lb. maximum lifting capacity
Freestanding design
Perfect for parking, storage and service
Double-wide configuration for quad-vehicle storage
Four runways
Super-tall rise
Extra-long ramp
Runways accommodate wide or narrow vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Oversized sheave diameter reduces cable fatigue
High-speed lifting
Features heavy-duty 3/8″ aircraft cable
Rugged 1.25″ roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Inside runways adjust for different tread widths
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available

Capacity

Lifting Capacity*
9,000 lbs. (4,082 kg)

*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)

*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)

Rise

A – Min. Runway Height:
7″ (178 mm)

B – Max. Rise:
82″ (2,083 mm)

C – Max. Lifting Height:
89″ (2,261 mm)

Time to Full Rise:
65 seconds

Outside Dimensions

D – Overall Width:
202″ (5,131 mm)

E – Outside Length:
198″ (5,029 mm)

F – Overall Length:
224″ (5,690 mm)

G – Height of Columns:
102″ (2,591 mm)

Inside Dimensions

H – Width Between Columns:
192″ (4,877 mm)

I – Drive-Thru Clearance:
178″ (4,521 mm)

Runways

J – Runway Width:
19″ (483 mm)

K – Length of Runways:
188″ (4,775 mm)

L – Width Between Runways:
37″ (940 mm) or 42″ (1,067 mm)

M – Runway Centerline:
56″ (1,422 mm) or 61″ (1,549 mm)

N – Outside Edge of Runways:
75″ (1,905 mm) or 80″ (2,032 mm)

Minimum Wheelbase

Rated Capacity:
135″ (3,429 mm)

75% Capacity:
115″ (2,921 mm)

50% Capacity:
95″ (2,413 mm)

25% Capacity:
80″ (2,032 mm)

Locking

Locking Positions:
16

Lock Spacing:
Every 4″ (102 mm)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph

Noise:
45 dB

Shipping

Weight:
2,987-lbs. (1354.9 kg)

Dimensions:
206” x 22” x 40” (5,232 mm x 559 mm x 1,016 mm)