The BendPak XPR-18CL-192 future-proofs your business. Get the same exceptional direct-drive lifting performance, clearfloor convenience and super-duty maximum capacity as with the standard XPR-18CL-192, but with an added 24″ up top. Make sure your business can specialize in taller, “Sprinter” delivery, service and transportation vehicles before it’s too late.
18,000-lb. lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Padded overhead safety shutoff bar
Taller column height provides greater overhead clearance
Single-piece columns / model XPR-18CL
Bolt-on column extensions / model XPR-18CL-192
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Oversized 53″ tall carriage for superior strength and durability
Electric / hydraulic power system
Oversized A36 steel base plate
Self-lubricating dura-glide UHMW polyethylene bearing system
Safety locks in each column spaced every 3″
Two-stage telescoping front and rear arms
Automatic arm restraints
Heavy-duty 1/2″ aircraft-quality equalizer cables
6” diameter machined steel cable sheaves reduces cable fatigue
8-piece truck and van adapter set STANDARD
Frame cradle pads STANDARD
Round rubber contact pads STANDARD
ALI certified
MODEL
XPR-18CL-192
Lifting Capacity*
18,000 lbs. / 8,165 kg.
*Max Capacity / Front Axle
9,000 lbs. / 4,082 kg.
*Max Capacity / Rear Axle
9,000 lbs. / 4,082 kg.
A – Height Overall:
192.7″ / 4,895 mm.*
B – Width Overall (Outside of Base Plate):
155″ / 3,937 mm.
C – Width (Outside of Columns):
144″ / 3,658 mm.
D – Floor To Overhead Switch:
187.7″ / 4,768 mm.*
E – Inside Columns:
120″ / 3,048 mm.
F – Reach (Front Arm Min.):
39″ / 991 mm.
G – Reach (Front Arm Max.):
60″ / 1,524 mm.
H – Reach (Rear Arm Min.):
39″ / 991 mm.
I – Reach (Rear Arm Max.):
60″ / 1,524 mm.
J – Min. Pad Height:
5″ / 127 mm.
K – Rise:
69″ / 1,753 mm.
L – Max Lift Height (Pad Only):
74″ / 1,880 mm.
M – Max Lift Height (6″ Adapter):
80″ / 2,032 mm.
N – Drive-Thru Clearance:
106″ / 2,692 mm.
Motor (**)
220 VAC / 60 Hz. 1Ph.
Time of full Rise:
45 Seconds
Max Load Per Arm:
4,500 lbs. / 2,041 kg.
Reviews
There are no reviews yet.